« Back to Finds Posted April 1st, 2011 by Scott

  • platmxt.jpg
  • platmxt2.jpg
  • platmxt3.jpg
Item Found: Returned

Location: California

Metal Detector Used: MXT


More about the MXT
MXT
$799.95
Versatile high-performance detector that's easy to use with 3 distinct programs for prospecting, relic hunting, and coins and jewelry.

Find Out More
April 1st, 2011

White's Electronics,

I received a call from a man stating that his platinum wedding band had been lost the day before. The ring had apparently been dropped in the sand in an area near the bottom of the stairs to their property. Upon meeting Paul, I found out that he had done his homework. After searching briefly for the band he realized that it was more likely they would drive the ring deeper than find it so the search was stopped.

He also performed a perfect re-enactment of how the ring was lost so I figured it was just a matter of putting my coil over it. Being a platinum ring, I decided my Whites MXT would be the best machine to find this lower-conductivity material. It turned out to be the right call. I started by sweeping my coil into and around some large rocks and also across the bottom step of the stairs, which was covered with about 3?-4? of sand. I swept out in front of the stairs and made one more sweep across the bottom step. That is when it got interesting. These old concrete stairs were reinforced with steel. It is exposed and rusting out in many spots. My MXT was a little chatty but dealing with the difficult conditions nicely when I noticed the threshold slightly rise and then null out (go silent) in one spot. Nothing that stood out too much but just a little....different.

It was directly over the bottom step...with its reinforcing steel! It was also up against the riser of the next step (also with reinforcing steel in it) so there was very little room to sweep the coil and a lot of interference. This one particular spot was a worst case scenario for trying to locate anything let alone platinum. I re-swept the spot in tighter and tighter arcs and was eventually able to isolate a "clean" signal, a repeating VDI of 30. From the looks of it, the target was probably a large pulltab. The reading I was getting was too high for what I was searching for...or was it?

Paul is a pretty big guy and he did say that the ring wore a little loose but could it be this big? I reached down into the sand to retrieve my "pulltab" and out came a beautiful, huge Tiffany's platinum wedding band. I was stunned. Total search time...about 1 minute BUT the thing is, the ring was sitting in the one spot in the area it COULD have hidden. The iron in the concrete was almost hiding the ring. The signal was being overwhelmed and almost completely masked. The detecting gods were testing me and my equipment today and we passed. This "easy" recovery could have easily been missed without sound tactics AND the perfect equipment...my MXT with my 6x10 DD coil. The feeling of reuniting Paul with his "lost" ring is one I can't describe and won't even try. I even got a tearful "I love you" from his mother-in-law and THAT was worth its weight in gold...or platinum.

Update; since this recovery my gear was stolen...including my D2 and 6x10 coils. Whenever I can manage to replace them I'll be up and running with more great recoveries.

Scott (CA)

« Back to Finds

More Stories

July 1st, 2014
I purchased my Coinmaster GT last spring after wanting to get into metal detecting for sometime. I spent the summer and fall hunting everywhere, finding mostly newer coins and some…
July 1st, 2014
Last Sunday after church I decided to go metal detecting on the beach during low tide. So I loaded up my trusty Coinmaster GT [this is my 2nd one, the…
July 1st, 2014
Now I am not one to tout the benefits of one detector or another, but this time I just can't help myself. My White's Coinmaster GT has shown me just…
July 1st, 2014
I hit the beach for low tide which was around 10pm . This beach is old and all the top sand is still gone because of super storm sandy .…
1 matching finds